|
|
 |
NEWS |
|
wedm
|
| Release time：2014.04.08 News source：Taizhou Skuch Auto Parts Co.,Ltd.tie rod end,rack end,ball joint,stabilizer link,drag link Browsing number： |
| |
According to Mr Leong to be ball joint understanding, machine overall processing time was reduced by 30%, cutting steel material surface roughness can reach Ra0.08 including m below.
Processing speed is fast
The CUT 2000 s / 3000 s a high standard of discharge power to improve the processing speed. Thanks to intelligent energy to drive directly on the discharge power supply module, CUT the processing time of a 2000 s / 3000 s decreased more than 30%. New interpublic DPS discharge power supply is configured with a variety of machining system, can produce very high precision, at the same time to obtain perfect surface quality and the highest speed.
In a processing comparison experiments, we use CUT2000 and CUT2000S machine tool processing the same a punch, workpiece material for steel, workpiece height is 57 mm, the size is 15 * 15 mm. CUT2000S used to cut the five carry on the processing, a final roughness for Ra0.2 microns. Compared with CUT2000 machine tools, machining efficiency overall increase of 31%.
Wear silk
New optional wear silk expert system makes the difficult conditions of wearing silk become simple. Expert system is extensible device to wear silk, wire driven from the top thread guide to starting hole on the plane, according to the different of the wire diameter, through a precision tubes, the wire guide to the lower guide wire mouth. Result: from the simple to the complex conditions of wear silk conditions can wear silk success.
Wear silk standard configuration includes a nozzle to improve any wire diameter less than 0.3 mm (diameter) under standard conditions (close to the workpiece on the plane) to wear silk reliability. There are two kinds of suitable for different application of wire diameter nozzle optional: one kind is filaments (0.05 0.07 mm wire diameter), there is a dedicated to 0.1 0.15 mm wire diameter. The two are all on the workpiece on the plane and not through the workpiece to wear silk. In addition, the needle tube with two kinds of nozzles (outside diameter is 0.4 mm and 0.8 mm respectively) can be used to need through the artifacts to wear silk thread mouth under the case. The length of the needle tube is 30 mm for maximum wear silk filament diameter to 0.25 mm.
Simple automatic silk exchange
CUT2000S and CUT3000S machine tool used for the automatic double wire switch function (AWC) has been known and proven. GF processing scheme of groundbreaking automatic double wire switch module still is unique characteristics of wire-cut machine field. AWC module has opened up a new road of more flexibility and process control, this is because it can use different wire diameter and wire materials for processing. Roughing, for example, you can use the zinc wire or large diameter for wire in order to improve the machining efficiency, then automatically switch to the standard size precision in order to reduce operating costs.
When the workpiece requires the use of filaments in (0.1 mm or more thin silk diameter), efficiency particularly evident. AWC for before she never reached the limit of the performance to users. Now, filaments can be completely processed. For example: 80 mm high punch processing, can use the 0.1 mm wire diameter and rough machining with coarse silk processing, as a result, more energy, more quickly.
Advanced online measurement units, measurement more convenient
Optional advanced online measurement unit April system process the micron grade to a new level and to ensure that 100% of the processing results. Based on the optical measurement system, directly online visual measuring machine, through the integration of the CCD camera auto focus for automatic measurement cycle. With advanced April module, you can ensure consistent and theoretical contour DXF file file the best precision of outline.
Advanced online measure function to redefine the process control of high precision mould processing. First of all, without having to remove the artifacts to measure closed, avoid the secondary loaded with some positioning error. More amazing is that machine can according to the result of the online measurement, automatic generation of correction procedure to repair the local error. Senior online measurement function also redefine the process control of high precision parts processing; First of all, without having to make complex clamping position and the second dimension correction; And, more importantly, for complex parts localization is very simple and reliable.
The highest accuracy, perfect results
CUT2000S and CUT3000S is on the basis of the famous CUT2000 and CUT3000 machine tool, which has the same accuracy and can predict the perfect results, as minimum wire diameter 0.05 millimeters for micro parts processing. 5 new machines are equipped with the same VISION control system, powerful function, convenient arrangement and management of a series of unmanned machining. Moreover, 3 d setting probe system greatly increases the speed setting.
The best covers an area of
Clear line and arc shape design CUT2000S and CUT3000S machine tool has the best area and excellent close to design. CUT2000S machine size is 2095 * 1950 * 2232 mm, and the CUT of 3000 S is 2685 x 2115 x 2232 mm. C structure of cast iron bed, which has the best covers an area of modern design idea, and has high stability and dynamic rigidity.
|
|
|
|
