|
|
 |
NEWS |
|
Automobile stabilizer bar fatigue testing machine
|
| Release time：2014.04.26 News source：Taizhou Skuch Auto Parts Co.,Ltd.tie rod end,rack end,ball joint,stabilizer link,drag link Browsing number： |
| |
Automobile stabilizer bar fatigue testing machine, fatigue testing machine stabilizer bar, uh hung ball joint for you to explain the purpose and performance stabilizer bar:
A car stabilizer bar fatigue testing machine structural characteristics and uses:
Mechanical fatigue test rig stabilizer bar car is driven by the system, transmission, amplitude adjustment mechanism, position adjustment system, control the display and other system components for fatigue performance test a variety of automotive stabilizer bar. The test machine consists of an electromagnetic motor speed control system, driven by the eccentric rod, while driving the swing lever driven secondary stabilizer link, complete the reciprocating sliding fatigue testing stabilizer bar. The aircraft pollution, high efficiency, wide tuning range and test space, coupled with appropriate aids, automotive stabilizer fatigue tests can be completed with different specifications. The aircraft through the MCU control, the number of trials to reach the automatic shutdown feature, the machine is highly integrated, simple structure, low failure rate, stable performance, reliable and easy to operate. Widely used in industrial enterprises, research institutions and other industries
Second, auto stabilizer bar fatigue testing machine key performance indicators:
1. Maximum test force (push-pull): 20kN
2. Amplitude: Max: 0 ~ 70mm adjustable
3. Test frequency: 0 ~ 3Hz adjustable
4. Spring stations: 1 (ie, each test a stabilizer bar)
5. Counter Capacity: 9 × 109 times
6. Function: Set the number of tests automatically shut down
7. Is the length of the test stabilizer bar: 600 ~ 2000mm can be adjusted (manually)
In the clamping point and two stabilizer bar link (pendulum) has at scale marked to accurately adjust the stabilizer bar mounting position and swing (600-1500mm clamping length)
8. Be tested stabilizer arm length: 200 ~ 600mm can be adjusted (manually) with a scale marked to accurately adjust the mounting position of the stabilizer bar
9. Is the length between the test and the length of the long arm of the stabilizer bar angle between: 0 ~ 100mm can be adjusted (manually)
10. Main motor power: 7.5kW
11. Display: Digital display the number of tests, test frequency, etc.
12. Power supply voltage: three-phase four-wire 380V, 50Hz
|
|
|
|
